U.S. Solid 1/4" Electric Solenoid Valve 110V AC Air Water NBR Normally Closed

U.S. Solid normally closed (N/C) electric solenoid valve is constructed with a Nylon, engineering plastic body, one-quarter inch (1/4") female threaded (NPT) connections, and nitrile rubber (NBR) seals. Suitable for use with hot or cold water, gas, air, oils, very low viscosity fluids (< 20 cst), etc.

Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, water exchange for aquarium, air horn, or bleeding moisture from an air tank.

Brand: U.S. Solid

Model: USS2-00050

Size: 1/4"

Flow Aperture: 2.5 mm

Body Material: Nylon engineering plastic

Gasket / Diaphragm / Seal: NBR

Rated voltage: AC 110 V, ± 10%

Current: 0.036 A

Power rating: 4 VA

Operation Type: Direct Lift Valve

Operation Mode: Normally Closed

Operational pressure range: 0 to 101 PSI / 0-0.7 Mpa (for Air, Water); 0 to 72 PSI / 0-0.5 Mpa (for Oil)

Flow capacity: 0.23 gallons per minute (GPM) of water at 60oF with a pressure drop of 1 PSI

Flow value: 0.23 Cv

Minimum operational temperature: 23 degrees Fahrenheit (-5 degrees Celsius)

Maximum operational temperature: 176 degrees Fahrenheit (80 degrees Celsius)

Suitable Media: Air, water, oil, natural gas, etc. Can not be used in strong acid, strong base, waste water, industrial gas and other media containing many impurities.

Valve is not intended to be energized continuously for more than 8 hours. This can lead to burnout of the coil, and malfunctioning of the valve.

Manufactured in China. Quality assurance and/or conformity managed in accordance with standards:

ISO 9001:2000; GB/T 19001:2000; European EN61000-6-1:2001 and EN61000-6-3:2001.