Polymaker Nebulizers Accessory for Polymaker Polysher (Pack of

Polymaker Nebulizers Accessory for Polymaker Polysher (Pack of 2)
- Post-Processing Machine: The Polymaker Polysher is designed to polish FDM/FFF 3D printed parts made with PolySmooth, resulting in a glossy, layer-free surface finish.
- Safe & Easy to Use: The Polymaker Polysher employs nebulizer technology, requiring no heating and only a small liquid reservoir for polishing. This liquid-phase polishing process ensures all electronic components are sealed, preventing sparks inside the chamber. Simply place it on your desk, adjust the dial to set the time, and the post-processing will start and end automatically.
- Low Costs: The Polymaker Polysher is not only affordable but also has a very low running cost. It can use either isopropyl alcohol (isopropanol) or ethanol, allowing you to choose the most readily available option.
- NOT A 3D Printer: The Polymaker Polysher is NOT a 3D printer. You need an extrusion-based FDM/FFF 3D printer to use it. Specifically, PolySmooth is a filament designed for printing in the same manner as PLA. After printing, you can use the Polysher to achieve an exceptional surface finish. Check out our Polysher video on YouTube for a demonstration.
- Polymaker Nebulizer Accessories: Pack of 2 for Polysher. Two nebulizers included for enhanced performance with the Polymaker Polysher.
Specifications

Technology Micro-Droplet Polishing

Compatible Material: PolySmooth

Polishing Liquid: Isopropanol or ethanol, 70% or above [90% or higher recommended]

Polishing Time: 20-40 min typical [varies based on part size, alcohol concentration and ambient temp]

Product Dimensions: 230 x 300 x 360 mm [9.1 x 11.8 x 14.2 in]

Shipping Box Dimensions: 350 x 400 x 450 [13.8 x 15.7 x 18.1 in]

Product Weight: 4 Kg [8.81 lbs]

Shipping Weight: 6.8 Kg [15 lbs]

Maximum Part Size: Up to a 150 mm (diameter) x 180 mm (height) cylinder [5.9 in (diameter) x 7.1 in (height)]

Operating Temperature:15-32 Â°C [59-90 Â°F]

Storage Temperature: 0-38 Â°C [32-100 Â°F]

Power Requirements:Power Supply: INPUT, AC 100-240V, 50/60Hz, 0.4A. OUTPUT: 5V 2000 mA. Polysher INPUT: DC 5V, 2000 mA

FQAs:

1. Is the Polysher a new 3D printer?
Answer 1: No - the Polysher is NOT a 3D printer. You still need an extrusion-based, FDM/FFF printer in order to use our new products. Specifically, PolySmooth is a new filament that you can print with your 3D printer, just like how you print with your PLA. Once the printing is done, you can post-process your printed objects in the Polysher to obtain the amazing surface finish. You can watch our campaign video or read the project description for more details.
2. Can I use PLA or ABS parts in the Polysher?
Answer 2: The Polysher is designed to only work with PolySmooth and alcohol; in addition PLA and ABS are not polishable with alcohol. We do not recommend other liquids/solvents other than isopropanol or ethanol.

Country	USA
Brand	POLYMAKER
Manufacturer	Polymaker
Binding	Tools & Home Improvement
ItemPartNumber	PM70801
Color	Polymaker Nebulizers Accessory for Polymaker Polysher (Pack of 2)
Size	Polymaker Nebulizers Accessory
UnitCount	1
EANs	6938936708018
ReleaseDate	0000-00-00

Polymaker Nebulizers Accessory for Polymaker Polysher (Pack of 2)

You might also like...