20KG RC Servo High Torque Servo Motors with 25T Servo Horn, Dual Ball Bearing, Aluminium Case, Metal Bracket, Waterproof Metal Gear Steering Digital Servo for RC Car Robot DIY, Control Angle 180°

Specifications:
Weight: 65g(2.32OZ)
Dimension: 40*20*40.5mm(1.57*0.78*1.59inch)
Speed: 0.16sec/60°(7.4V)
Torque：20 kg·cm (277.6 oz·in) @6.6V
Working Voltage: 6-7.4V
Min Working Current: 1A
No-Load Current: 100mA
# Spline: 25T(6mm in diameter)
servo horn thickness:(main servo horn 1.016inch,assistant servo horn 0.508inch)

Control Specifications:
Control Method: PWM
Pulse Width: 500~2500
Duty Ratio: 0.5ms~2.5ms
Pulse Period: 20ms

Please make sure that the duty cycle of the controller you are using conform to our specifications, otherwise the servo can't turn up to claimed degree

Wire Layout:
Red Wire: +
Black Wire: GND
White Wire: PWM/Signal

Package Contents:
1 x Digital servo
1 x Screw kit(as shown in the figure)
2 x Metal servo horn
2 x Metal Bracket

If you have any questions, please feel free to contact us at [email protected], we will help you as soon as possible

Note:
Please be sure to avoid locked-rotor when using servo, locked-rotor means that artificially or machine obstructs the servo to rotate normally, the locked-rotor will lead to internal current increased to more than 7 times and the temperature increases, servo will burn out.

Notice for use:
1. It's recommended that use lithium polymer battery with high rate discharge(min 5C), please don't use dry battery.
2. Please use a short and thick power cord, don't use Dupont cord