PoE Texas POES-8-7 | 8-Port Passive PoE Switch for 802.3af or 24-Volt Power Over Ethernet Devices | Power Supply NOT Included

Specifications
8 switch ports with 10/100 auto detect operation, with status LED
100 to 240 volt AC input, 50 or 60 hz high efficiency
7 always on PoE outputs with either Mode A and/or Mode B
Mode A power and data on pins 12 (-) and 36 (+)
Mode B power or pins 45 (+) and 78 (-) with data on pins 12 and 36
Dual PTC fuses on each PoE output port
One 650 ma fuse per port for Mode A
One 1000 ma fuse per port for Mode B
18 volt to 56 volt operation - low power- under 3 watts
3 power supply inputs
2x 2.1mm power connectors, center positive
Mode A input with LED status
Mode B input with LED status
LED indicates 18/24 volt operation or 48/56 volt operation
Maximum input current per mode - 2.5 amps
Mode B PoE power input from the uplink port - 1.25 amps max
Dual Power supply operation
Redundancy - 48v 802.3af only - see text
Load balancing - 48v 802.3af only - see text 
Mixed voltage - Mode A at 48v and Mode B at 24v - see text
Uplink port 10/100 mb
No PoE voltage out
Mode B PoE in
802.3af emulation ( always on, no autonegotiation)
48 volt in either A or B modes

Used to Power
Mikrotik
OpenMesh,
Ubiquiti passive PoE
24 volt - use mode B only
Low Power - excellent for Battery and Solar applications
PoE repeating is possible in Mode B - power this switch and attached devices remotely
195mm x 82mm x 26mm W x H x D

Available power supply options (NOT INCLUDED)
24 volts
48 volts
56 volts