8S 24V 25.6V 1.2A Li-ion Lipo Lifepo4 LFP Battery Active

8S 24V 25.6V 1.2A Li-ion Lipo Lifepo4 LFP Battery Active Equalizer BMS Balancer Inductive Balance Lithium Battery Energy Transfer Board (8S)
- NOTE: This PCB is only suitable for 8S battery pack. and Not recommended to use poor quality battery pack to test. The indicator light will flash and report an error if this PCB is used in other battery packs. Before connecting this balance board, be sure to check whether each battery is wired correctly(Measure whether the voltage of each battery string is correct), and do a good job of insulation. otherwise it will short-circuit and burn the board. If Buyer short-circuits and burns the board, Buyer needs to bear the responsibility instead of returning it.
- Tips: The equalization board is not a BMS protection board, it is an auxiliary to the protection board, so no matter how bad the battery you use to test, it can be used, But it has no overvoltage/overdischarge protection function. Overvoltage/overdischarge is the function of the BMS protection board. If voltage protection is required, it is best to use it in parallel with the BMS protection board.
- Applicable battery type: NCM(Li-ion)/LFP, NOT support LTO; Single voltage working range: 3.0V-4.2V; Suggested battery capacity: below 30AH, If more than 30AH, pls search Capacitor Faster Whole Group Balancer " B096NLHXPF " to purchase. (Tips: The inductance equalization board needs to be charged/discharged many times before the voltage equalization can achieve a better effect.)
- Balance method: Detect that the voltage difference between adjacent batteries is greater than 0.1V to trigger the start of equalization, and the adjacent battery voltage difference is less than 0.03V to stop working. (Note: This board is based on the principle of adjacent equalization and cannot be used as a maintenance tool. The voltage difference generated by many times charging/discharging triggers the work of the equalization board to achieve energy transfer and balance.)
- Voltage balance accuracy: 30mV (typical value) between adjacent voltages; Balance current: 0.1V voltage difference 0.5A balance current, the maximum balance current is 1.2A when the voltage difference is above 0.2V. Static working current: 0.01mA; Under-voltage protection dormant voltage: The adjacent voltage difference is less than 0.03V and enters dormant state.

Country	USA
Brand	QINIZX
Manufacturer	QINIZX-JW
Binding	Electronics
ItemPartNumber	InduBalce-8S
Model	InduBalce-8S
Warranty	Manufacturer warranty for 90 days from date of purchase.
Color	Black
Size	8S
UnitCount	1
UPCs	048518727408
EANs	0048518727408
ReleaseDate	0000-00-00

8S 24V 25.6V 1.2A Li-ion Lipo Lifepo4 LFP Battery Active Equalizer BMS Balancer Inductive Balance Lithium Battery Energy Transfer Board (8S)

Customers who purchased this also purchased....