10 Piece Set Lapping Microfinishing Polishing Film 0.05 Micron

10 Piece Set Lapping Microfinishing Polishing Film 0.05 Micron (500,000 Grit) to 60 Micron (250 Grit) 8.5 inches x 11 inches Non- Pressure Sensitive Adhesive 3 Mil Backing
- 10 Piece Set Lapping Microfinishing Polishing Film with the following grades: : 0.05 micron (off-white) or 500,000 grit, 0.3 micron (white) or 60,000 grit, 1 micron (light green) or 14,000 grit, 3 micron (pink) or 8,000 grit, 5 micron (brown) or 4500 grit, 9 micron (light blue) or 1800 grit, 12 micron (yellow) or 1200 grit, 30 micron (green) or 600 grit, 40 micron (blue) or 300 and 60 micron (ivory) or 250 grit.
- 8.5 inches x 11 inches Non-PSA (Pressure Sensitive Adhesive) backing
- 3 mil high-strength water-resistent polymer film backing is less likely to tear than traditional wet or dry sandpaper
- Aluminum Oxide (AO) abrasive material self-fractures in use to expose fresh cutting edges
- Available in a wide range of precise micron grades from 0.05 micron (500,000 grit) to 60 micron (250 grit) to meet any sharpening or polishing need. They can be used to put a wicked sharp edge on wood chisels, plane irons, carving tools or knives. Can also be used to put a fine polish on jewelry or gemstones.
This lapping film is 100% made in the USA by 3M. These microfinishing lapping sheets were developed for industrial applications and can be used to flat lap or polish just about anything. This lapping film contains carefully graded aluminum oxide particles that are electrostatically coated onto a high strength polyester film backing. This fast cutting, water resistant abrasive provides precise, consistent, close tolerance finishes, and are available in a wide range of precise micron grades to meet any sharpening or polishing need. They can be affixed to a hard flat surface (usually 1/4 inch glass) and used to get a scary sharp edge on wood chisels or plane irons. They can be wrapped around contoured sticks and used to sharpen carving tools. They can put a wicked sharp edge on all kinds of knives. They can also be used to put a fine polish on jewelry or gem stones. These are NON PSA and are NOT adhesive backed. They have a 3 mil high-strength polyester film backing which is less likely to tear than traditional wet or dry sandpaper. The sheets are not marked so using their color is the only accurate way to identify them. These Aluminum Oxide (AO) sheets come in the following grades: 1) 0.3 micron (white) or 60.000 grit 2) 1 micron (light green) or 14,000 grit 3) 3 micron (pink) or 8,000 grit 4) 5 micron (brown) or 4500 grit 5) 9 micron (light blue) or 1800 grit 6) 12 micron (yellow) or 1200 grit 7) 30 micron (green) or 600 grit 8) 40 micron (blue) or 300 grit 9) 60 micron (ivory) or 250 grit The sheets are not marked so using their color is the only accurate way to identify. In the finer grits, it can be difficult to differentiate the abrasive side from the backing. The abrasive side will always have a matte finish, where the film backing side will be glossy.
Country USA
Brand Taytools
Manufacturer Taytools
Binding Misc.
ItemPartNumber NONPSA-3M-9PIECE
Model .
Size 8.5 x 11 Inches
UPCs 700667472010
EANs 0700667472010
ReleaseDate 0000-00-00

Country	USA
Brand	Taytools
Manufacturer	Taytools
Binding	Misc.
ItemPartNumber	NONPSA-3M-9PIECE
Model	.
Size	8.5 x 11 Inches
UPCs	700667472010
EANs	0700667472010
ReleaseDate	0000-00-00

10 Piece Set Lapping Microfinishing Polishing Film 0.05 Micron (500,000 Grit) to 60 Micron (250 Grit) 8.5 inches x 11 inches Non- Pressure Sensitive Adhesive 3 Mil Backing

You might also like...