AMTAST Digital Turbidity Meter with Ranges (0~1100 NTU/FNU,

AMTAST Digital Turbidity Meter with Ranges (0~1100 NTU/FNU, 0~275 EBC, 0~9999 ASBC) Handheld Turbidity Tester with Single & Continuous Modes Turbidity Gauge for Lab Water Treatment (Model AMT27)
- 𝐔𝐬𝐞𝐫−𝐅𝐫𝐢𝐞𝐧𝐝𝐥𝐲 𝐎𝐩𝐞𝐫𝐚𝐭𝐢𝐨𝐧 𝐰𝐢𝐭𝐡 𝐃𝐚𝐭𝐚 𝐒𝐭𝐨𝐫𝐚𝐠𝐞 𝐂𝐚𝐩𝐚𝐛𝐢𝐥𝐢𝐭𝐲 – This turbidity meter provides simple operation and accurate results while storing up to 100 data sets in its internal memory. The intuitive interface ensures quick measurements without complicated procedures, making professional testing accessible to all users.
- 𝐂𝐨𝐦𝐩𝐮𝐭𝐞𝐫 𝐂𝐨𝐧𝐧𝐞𝐜𝐭𝐢𝐯𝐢𝐭𝐲 𝐟𝐨𝐫 𝐀𝐝𝐯𝐚𝐧𝐜𝐞𝐝 𝐃𝐚𝐭𝐚 𝐌𝐚𝐧𝐚𝐠𝐞𝐦𝐞𝐧𝐭 – Our handheld turbidity tester features a USB interface for data storage and transfer to computers. This allows for detailed analysis and long-term data tracking using various software applications, enhancing your reporting capabilities.
- 𝐃𝐮𝐚𝐥 𝐌𝐞𝐚𝐬𝐮𝐫𝐞𝐦𝐞𝐧𝐭 𝐌𝐨𝐝𝐞𝐬 𝐟𝐨𝐫 𝐃𝐢𝐟𝐟𝐞𝐫𝐞𝐧𝐭 𝐀𝐩𝐩𝐥𝐢𝐜𝐚𝐭𝐢𝐨𝐧𝐬 – The turbidity gauge offers both single measurement mode with automatic stable reading recognition and continuous measurement mode for sample indexing or matching. These flexible modes adapt to various testing scenarios from quick checks to detailed comparisons.
- 𝐄𝐦𝐞𝐫𝐠𝐞𝐧𝐜𝐲 𝐏𝐨𝐰𝐞𝐫 𝐒𝐨𝐥𝐮𝐭𝐢𝐨𝐧 𝐟𝐨𝐫 𝐔𝐧𝐢𝐧𝐭𝐞𝐫𝐫𝐮𝐩𝐭𝐞𝐝 𝐓𝐞𝐬𝐭𝐢𝐧𝐠 – Our turbidimeter can use USB cable connection to a computer as temporary power when batteries are depleted. This practical feature prevents interruption during critical measurements and ensures complete data preservation.
- 𝐂𝐨𝐦𝐩𝐥𝐞𝐭𝐞 𝐏𝐫𝐨𝐟𝐞𝐬𝐬𝐢𝐨𝐧𝐚𝐥 𝐏𝐚𝐜𝐤𝐚𝐠𝐞 𝐑𝐞𝐚𝐝𝐲 𝐟𝐨𝐫 𝐔𝐬𝐞 – This digital water turbidimeter includes the AMT27 instrument, glass vials, multiple calibration standards, lint-free cloth, and portable case. The comprehensive package provides immediate operation capability for various water testing environments.
Specifications:

Measurement Range:0~1100 NTU/FNU, 0~275 EBC, 0~9999 ASBC

Resolution:0.01(0~100 NTU), 0.1 (100~999 NTU), 1 (999~1100 NTU)

Accuracy:±2%(0~500 NTU), ±3% (501~1100 NTU)

DefaultCalibration Standards:0.02 NTU, 10.00 NTU, 200 NTU, 500 NTU, 1000 NTU orUser-Defined

Light Source:Infrared-emittingdiode (850 nm wavelength)

Detector:SiliconPhotodiode

Stray Light:<0.02 NTU

Sample Vials:60(H)×25(Dia)mm

Power Off:Manualor Automatic (15 minutes)

Reset Function:Yes

Memory:Stores upto 100 data sets

Output:USBCommunication Interface

OperatingTemperature:0~60°C

Power Requirements:1×9VBattery

Dimensions:180(L)×85(W)×70(H)mm

Weight:300g

Important Notesfor Measurement and Calibration:

Do not hold themeter in the hand during measurement and calibration.

Glass vials andcaps must be cleaned thoroughly with deionised water after each measurement.Minor residuals can cause errors.

The outside of thevial must be clean and dry, before starting the test. Wipe the vial with alint-free cloth to remove fingerprints or waterdrops.

If the vial hasminor scratches or scuffs, add a few drops of silicone oil to outside of thevial. Wipe with lint-free cloth.

For the low turbidity samples (0 to 200NTU), we recommend that you use the same be aligned with the arrow on the meter

To avoid errorsfrom ambient light interference, do not use the meter in bright sunlight.Always close the light shield lid during measurement and

Calibration

Avoid spillage of water i`n the sample chamber.It may cause damage the meter
Country USA
Brand AMTAST
Manufacturer AMTAST
Binding Misc.
ItemPartNumber AMT27
Model AMT27
Size One Size
UnitCount 1
UPCs 799932015205
EANs 0799932015205
ReleaseDate 0000-00-00

Country	USA
Brand	AMTAST
Manufacturer	AMTAST
Binding	Misc.
ItemPartNumber	AMT27
Model	AMT27
Size	One Size
UnitCount	1
UPCs	799932015205
EANs	0799932015205
ReleaseDate	0000-00-00

AMTAST Digital Turbidity Meter with Ranges (0~1100 NTU/FNU, 0~275 EBC, 0~9999 ASBC) Handheld Turbidity Tester with Single & Continuous Modes Turbidity Gauge for Lab Water Treatment (Model AMT27)

Customers who purchased this also purchased....