ANYCUBIC LCD UV 405nm Rapid Resin for Photon 3D Printer-1 L/ 1

ANYCUBIC LCD UV 405nm Rapid Resin for Photon 3D Printer-1 L/ 1 kg Skin
- 1、Professional LCD molding resin. Optimize the formation of LCD low light source and printing efficiency is higher than the market compatible DLP / LCD / SLA resin. The resin is only designed for the LCD model of the resin, not recommended DLP or SLA machine.
- 2、High-speed solidify. This resin ensures the strength of molded parts and not excessive shrinkage, but also improve print speed, shorten the curing time and enhance the printing efficiency of LCD machines as much as possible.
- 3、Strong adhesion of the model and easy to detach after forming. Not only high success rate of printing and precision, but also to minimize resin release force and adhesion, so that the model attached to the forming platform can easily shovel and low viscosity makes it easier to clean the machine and model.
- 4、The material is rigid and tough. Strong material in the shovel model can easily lead to the model fragmentation, but too flexible material will be prone to the details of the print tensile deformation or fracture, which will affect the molding accuracy and aesthetics.
- 5、Model's performance is stable. The resin is stable under different climatic conditions and is also easy to store, overcoming the shortcomings of other resins easily damp softening and environmental corrosion
Parameter information:
Size:1Kg/1L
Main material: resin monomer & photoinitiator
Exposure parameters: Bottom exposure time(s) 20-60s, normal exposure time(s) 5-15s
Resin parameters:
Solidify wavelength:405nm
Hardness (D): 79.0
Viscosity (25 Â° C): 552.0 mpa.s
Liquid density: 1.100 g / cm3
Solid density: 1.184 g / cm3
Flexural strength:23.4 Mpa
Tensile strength: 23.4 Mpa
Elongation frequencyï¼š14.2 %
Shelf life: 1 year
Features: UV light will solidify the resin
Precautions:
1. Storage method
Keep away from light seals at room temperature.( Sunshine contains a lot of UV light, will solidify photosensitive resin. After testing, the light is not affected as long as it is not UV light)
It is recommended to save at 15 â„ƒ -35 â„ƒ ambient temperature, the lower the temperature, the higher the viscosity of the resin. Sealed storage, excessive dust or moisture can affect print quality. Sunshine contains a lot of UV light, will solidify photosensitive resin.
2.Usage:
Shake well before use, prohibiting the use of resin in places where there is a lot of sunlight
Wear gloves before use to avoid direct contact with the skin and keep the room ventilated
Inadvertent contact, as soon as possible to use a lot of water rinse. If you feel unwell, seek timely medical attention.
Printed models need to use high-concentration alcohol to clean about 30S (recommended concentration of 95% or more, the higher the better).
Do not pour the resin in the resin vat into the unused resin, do not leave the resin in the resin vat for a long time without use to avoid resin pollution affect the printing effect(long time without the resin can be introduced into airtight containers or sealed with plastic wrap shading save).
Country USA
Brand Anycubic
Color Skin 1L
EAN 0605175698429
Label ANYCUBIC
Manufacturer ANYCUBIC
MPN POT071
PartNumber POT071
Publisher ANYCUBIC
Studio ANYCUBIC
ReleaseDate 0000-00-00

Country	USA
Brand	Anycubic
Color	Skin 1L
EAN	0605175698429
Label	ANYCUBIC
Manufacturer	ANYCUBIC
MPN	POT071
PartNumber	POT071
Publisher	ANYCUBIC
Studio	ANYCUBIC
ReleaseDate	0000-00-00

ANYCUBIC LCD UV 405nm Rapid Resin for Photon 3D Printer-1 L/ 1 kg Skin

You might also like...