ANYCUBIC 3D Printer Resin, 405nm SLA UV-Curing Resin with High Precision and Quick Curing & Excellent Fluidity for LCD 3D Printing (Clear, 1kg)

Parameter information:
Size:1Kg/1L
Main material: resin monomer & photoinitiator
Exposure parameters: Bottom exposure time(s) 20-60s, normal exposure time(s) 5-15s
Resin parameters:
Solidify wavelength:405nm
Hardness (D): 79.0
Viscosity (25 ° C): 552.0 mpa.s
Liquid density: 1.100 g / cm3
Solid density: 1.184 g / cm3
Flexural strength:23.4 Mpa
Tensile strength: 23.4 Mpa
Elongation frequency：14.2 %
Shelf life: 1 year
Features: UV light will solidify the resin
Precautions:
1. Storage method
Keep away from light seals at room temperature.( Sunshine contains a lot of UV light, will solidify photosensitive resin. After testing, the light is not affected as long as it is not UV light)
It is recommended to save at 15 ℃ -35 ℃ ambient temperature, the lower the temperature, the higher the viscosity of the resin. Sealed storage, excessive dust or moisture can affect print quality. Sunshine contains a lot of UV light, will solidify photosensitive resin.
2.Usage:
Shake well before use, prohibiting the use of resin in places where there is a lot of sunlight
Wear gloves before use to avoid direct contact with the skin and keep the room ventilated
Inadvertent contact, as soon as possible to use a lot of water rinse. If you feel unwell, seek timely medical attention.
Printed models need to use high-concentration alcohol to clean about 30S (recommended concentration of 95% or more, the higher the better).
Do not pour the resin in the resin vat into the unused resin, do not leave the resin in the resin vat for a long time without use to avoid resin pollution affect the printing effect(long time without the resin can be introduced into airtight containers or sealed with plastic wrap shading save).