ECCPP 2PCS 3 inch 8 Lug Wheel Spacers 8x6.5 to 8x6.5 8x165.1mm to 8x165.1mm fits for ford F250 for ford F350 Econoline 1988-1998 | for RAM 2500 3500 DUALLY

ECCPP 2PCS 3 inch 8 Lug Wheel Spacers 8x6.5 to 8x6.5 8x165.1mm to 8x165.1mm fits for ford F250 for ford F350 Econoline 1988-1998 | for RAM 2500 3500 DUALLY

• 【FITMENTS INCLUDE】COMPATIBLE WITH 1988-1998 for Ford F-250 | 1988-1997 for Ford F-350 1994-2010 for Dodge Ram 2500 | 1994-2010 for Dodge Ram 3500
• 【SPECIFICATIONS】Set of 2 h-igh Quality Forged 6061 Aluminum Wheel Adapters/Spacers Vehicle Bolt Pattern: 8x6.5" Wheel Pattern: 8x6.5" Thickness: 3" (75mm) Thread Size: 9/16"x18 Inner Diameter: 125mm Stud Grade: 10.9 Material: Forged 6061 Aircraft Aluminum Full set of 16 machine pressed studs and 16 lug nuts This kit comes with everything you need for installation
• 【INSTALL ADVISE】Must be torqued down by HAND at 95 LBS The use of a thread lock adhesive is encourage for Manufacture ( Which we also sell ) The back of the wheel must sit flush on the adapter The studs on the vehicle cannot stick past the face of the adapter. If they do,you may need to modify by grinding/trimming
• 【VERIFY FITMENT】wheel spacers 8x6.5 Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are 9/16mm threads; 2) You have more than 3 inch of space between your fender and your wheel/tire; 3) Your factory wheel studs are shorter than 3 inch (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit); 4) Wheel center bore needs to be no smaller than 125mm,advise torque specs at 130-140 Ft/Lbs
• 【ADVANTAGE】8x6.5 WHEEL SPACERS (1)Increasing the extra gap between tire and vehicle hub assembly,improving the vehicle's performance in terms of handling and traction ,such as improve flexibility when turning.(2)Giving an aggressive performance to your vehicle.(3)Lowering the center of gravity,benefit for keeping stability at a h-igh speed.(4) Av-oid rubbing on the sway bar when install larger tires
• 【INSTALLATION TIPS FOR YOU 】The use of a thread lock adhesive is encourage for Manufacture.The back of the wheel must sit flush on the wheel spacers/adapter.The studs on the vehicle cannot stick past the face of the the wheel spacers/adapter. If they do,you may need to modify by grinding/trimming