Electro-Harmonix Switchblade Plus Channel Selector Pedal

Electro-Harmonix Switchblade Plus Channel Selector Pedal
- Easily switch between different pedal boards
- The tuner jack is hardwired to the input jack and provides a direct output for a tuner or other effects regardless of the state of the unit
- The audio path is completely passive
- Power adapter included
Switchblade+ Channel Selector Footswitch. "The Switchblade+ offers a convenient solution to a player's switching needs. Route your signal to either output A or B, or send it to both at once. Connect a tuner or effects pedal to its dedicated Tuner output. With a fully passive audio path and active LED indication, the new Switchblade+ is your utilitarian sidekick. - Controls - A/B Footswitch (LED) - Press this switch to route the input signal to either OUT A (Red LED) or OUT B (Green LED). A+B Footswitch (LED) - Press this switch to route the input signal to both OUT A and OUT B. When A+B is engaged (Red LED), the A/B Footswitch has no effect on the signal path. - I/O - INPUT - Connect the output of your instrument or another effects pedal to this jack. TUNER - Connect this jack to the input of a tuner device or another effects pedal. This jack is hardwired to the INPUT jack and provides a direct output regardless of the state of the unit. OUT A - Connect this jack to the input of an amplifier or the input of another effects pedal. Depending on the state of the A/B and A+B controls, this jack will output either the direct input signal or no signal. When the A/B LED is lit red or the A+B LED is lit up, OUT A is selected. OUT B - Connect this jack to the input of an amplifier or the input of another effects pedal. Depending on the state of the A/B and A+B controls, this jack will output either the direct input signal or no signal. When the A/B LED is lit green or the A+B LED is lit up, OUT B is selected. - Power - The SWITCHBLADE+ can be powered by a 9V battery or a 9VDC battery eliminator capable of delivering at least 16mA. The optional 9V power supply from Electro-Harmonix is 9.6DC-200BI (same as used by Boss & Ibanez) 9.6 Volts DC 200mA. The power supply must have a barrel connector with center negative. The SWITCHBLADE+ can also operate without power, since the audio path is fully passive. With no power, however, the LED indication will not function. When A+B is...

Country	USA
Brand	Electro-Harmonix
Manufacturer	Electro-Harmonix
Binding	Electronics
ItemPartNumber	93
Model	SWITCH+
Warranty	Electro-harmonix will repair your product if it fails to operate due to defects in materials or workmanship for a period of one year from date of purchase. In the event that it should ever become necessary to return your unit to the factory for repair, please ship the unit to us, securely packed, postage prepaid and insured, along with a copy of proof of purchase and with the appropriate handling charge as set forth on the instruction sheet for that unit. All other charges for parts and labor will be paid by electro-harmonix. This warranty does not cover batteries which must be replaced at customer’s expense or any unit opened and/or modified by the consumer. In addition, it will expedite the repair if you would include a short note describing the problem as specifically as possible. We, in turn, will do our best to see that your electro-harmonix accessory is back in your act fast. To qualify, submit your warranty card within 10 days of purchase. You can mail the warranty card included in your purchase or register your warranty online here. This warranty gives you specific legal rights. You may also have others which vary from state to state and from country to country. For warranty service of electro-harmonix effects in most locations, please email info@ehx. Com.
ReleaseDate	2012-03-19
UnitCount	1
UPCs	683274011219
EANs	0683274011219

Electro-Harmonix Switchblade Plus Channel Selector Pedal

You might also like...