HobbyKing TrackStar Roar Approved 1/10th Stock Class Brushless ESC and Motor Combo (17.5T)

ESC Specs: Max Voltage: 2S Lipoly / 6 cell NiMH Motor limit: 10.5T Resistance: 0.0004 ohm Operating current: 80A Burst Current: 380A Bec Current: 3A Bec Voltage: 6V "Blinky" mode (Non-timing mode): Yes Programming Options: Operation Mode: Forward/Brake/Reverse; Forward/Brake Only Initial Brake: 10% ~ 80% Drag Brake: 0% ~ 40% Brake Strength: 50% ~ 100% Voltage Cutoff: None ~ 3.5V/cell Punch Profile: Level 1 ~ 9 Neutral DeanBand: 1% ~ 8% Boost Timing: 0deg ~ 60deg Turbo Slope: 3deg/0.1s, 6deg/0.1s, 12deg/0.1s, 18deg/0.1s, 24deg/0.1s, Fastest Turbo Timing: 0deg ~ 30deg Boost Timing RPM: 2000 ~15000 Turbo Delay: Off, 0.05sec, 0.1sec, 0.15sec, 0.2sec, 0.25sec, 0.3sec, 0.35sec, 0.4sec Boost Timing ACC: 50RPM/deg ~ 700RPM/deg Reverse Speed: 25% ~ 100% Drive Frequency: 8Khz, 16Khz, 24khz Brake Frequency: 1,2,4,8,16Khz Temperature protection: On/Off Motor Specs: Can Size: 540 Turns: 17.5 RPM/v: 2270kv Sensored: Yes (Standard 6 pin harness) Max voltage: 7.4 (2S) Max Current: 28A Max Watts: 190w Can Diameter: 36mm Can Length: 53mm Shaft Size: 3.175mm Weight: 178g Includes: ESC x 1 Motor x 1 Sensor wire TrackStar Sticker Manual