MAX CLR Epoxy Resin System -Direct Contact Food Safe Coating, FDA Compliant High Gloss, Chemical Resistant, Crystal Clear Coating 4 Bar Tops & Tabletops & Wood Lathed Cups & Bowls- Clear Casting Resin

The MAX CLR A/B Epoxy Resin is FDA Compliant coating system suitable for brief-use direct food contact.

Upon cure, MAX CLR demonstrates crystal color clarity, excellent chemical resistance, and high impact resistance. The cured coating yields a stable and inert barrier that prevents foodstuffs from absorbing into porous substrates such as wood, pottery, and 3D printed plastics (PLA, PET).

MAX CLR demonstrates impact resistant, very high gloss, and surface durability. This formulation is in accordance with CFR Title 21, Part 175.300 and 175.105 for direct and indirect food contact as a resinous adhesive or coatings.

MAX CLR A/B is mixed 2:1 and the mixed viscosity is similar to cooking oil or light-syrup. It can be poured into place or brush applied

It offers a 30 to 45 minute working time and cures to a hard clear finish at room temperature.

PHYSICAL AND MECHANICAL PROPERTIES
Mix Ratio: 2:1
Mixed Viscosity: 860 cPs
Working Time: 45 Minutes
Tack-Free Time: 4 to 6 Hours At 75°F
Full Cure Time: 24 to 48 Hours At 75°F
Hardness: 78 to 80 Shore D
Transparent Clear Upon Cure

To View Usage And Instructional Videos, Visit Our YouTube Channel
https://bit.ly/2C8rIoi

Guidelines For Use For Direct Food Contact Application
https://bit.ly/2VV2AZ9

Use Directions
Prepare & Clean The Surface
Determine The Amount To Be Mixed
Use A Scale For Accuracy
Mix Until Uniform (See Mixing Vidoe)
Apply Unto The Prepared Surface
Allow To Cure For 4 to 6 Hours At 70°F to 80°F
Apply Secon Coat Directly
Cure Last Coat For 36 to 48 Hours At 75°F
Rinse With Warm Water Before Use