MCL61 - Magnetic Shielding Film for Low frequency magnetic fields, Electric fields, High frequency/RF fields. Width 2ft Length: 6ft

MCL61 is our new magnetic shielding film made from an amorphous cobalt alloy for shielding of low-frequency alternating magnetic fields. It also shields
low-frequency electric alternating fields and high-frequency fields. In comparison with MUMETALL our new MCL61 has many advantages: MUMETALL is soft and
sensitive, on bending, to shocks and on processing it looses the attenuation very fast. The cobalt strips in our MCL61 are flexible but hard even at small
bending radii. The attenuation remains constant even at high mechanical stress.

Because the cobalt strips are only 20 µm thin, 50 mm width and sharp like a knife, we laminate it for protection. Due to the lamination MCL61 is corrosion-resistant
even in humid environments. With a width of 61 cm big areas are shielded faster compared to 15 cm width MUMETALL-strips. MCL61 can easily be cut with scissors.

Processing Warning: The cutting edges are sharp like a knife! Its difficult to glue the film free of creases, best cover the area with solid wall coverings. For
walls, ceilings,and floors it is best use a high-viscous assembly adhesive, that adheres to non-absorbent substrates. Smooth the glue, lay up the film, smooth with
a pressure roller or squeegee. The sheets of MCL61 should be overlapped, level out the overlappings, paint it over with any commercial synthetic dispersion paint

Please pay attention that the film is a steam brake on wall areas! Grounding MCL61 is electrically isolated. To ground it, every strip has to be screwed with a
chopper disk, that penetrates the polyester film. The grounding set MCL contains all for 10-20 strips.