E2EF-X3D1 2M Proximity Sensor with All-Stainless Housing M12 NN

[Sensing head size] M12
[Type] Cylinder type
Shielded
[Sensing distance] 3 mm +/-10%
[Setting distance] 0 to 2.1 mm
[Differential distance] 15% max. of sensing distance
[Sensing object] Ferrous metal (Sensitivity lowers with non-ferrous metals.)
[Standard sensing object] Iron 21 x 21 x 1 mm
[Response frequency] 80 Hz (Average value)
[Power source] DC 2-wire models
[Power supply voltage] 10 to 30 VDC (ripple(p-p) 10% included)
[Leakage current] 0.8 mA
[Control output (Switching capacity)] 3 to 100 mA
[Control output (Residual voltage)] 3 V (Load current 100 mA max. with cable length of 2 m)
[Indicator] Operation indicator (red), Operation setting indicator (green)
[Operation mode] NO
[Protective circuit] Output short-cut protection, Surge suppressor
[Temperature influence] +/-20% max. of sensing distance in temperature range of -10 to +70 deg.C
(As the basis for sensing distance of 23 deg.C)
[Voltage influence] +/-1% max. of sensing distance in rated voltage range +/-15%.
(As the basis for sensing distance at standard power voltage)
[Insulation resistance] Between charged parts and the case: 50 M Ohm min. at 500 VDC
[Dielectric strength] Between charged parts and the case: 1,000 VAC 50/60 Hz for 1 min
[Vibration resistance] 10 to 55 Hz, 1.5-mm double amplitude each in X, Y, and Z directions for 2 h
[Shock resistance] 1000 m/s**2 for 10 times each in X, Y, and Z directions
[Degree of protection] IEC: IP67
[Connection method] Pre-wired models
(Cable length: 2 m)
[Weight (Packed state)] approx. 190 g
[Material] Case: Stainless steel (SUS303)
Sensing surface: Stainless steel (SUS303)
Clamping nuts: Stainless steel (SUS303)
Toothed washer: Iron zinc plating
[Accessories] Instruction manual


(21)