PoE Texas POE-IO-135 | Passive PoE Injector and Splitter Kit with 1.35 mm x 3.5 mm DC Connector and 10/100 Ethernet Via RJ45
Product Description
PoE Texas POE-IO-135 | Passive PoE Injector and Splitter Kit with 1.35 mm x 3.5 mm DC Connector and 10/100 Ethernet Via RJ45
- A low-cost solution for power delivery over the network cable (PoE)
- Passive PoE will output the the same input voltage - Use for 5v applications
- This Injector/Splitter kit allows you to extend Power via PoE to non-PoE devices
- The 1.35mm x 3.5mm DC connector fits most devices - Please see our 1.35mm to USB adapters for USB, MicroUSB and other conversions
allows low cost of delivery of power over the network cable.
This scheme allows power to be carried on 10/100 networks over the spare, unused pairs of a CAT5, CAT5E, or CAT6 Ethernet network cable.
Depending on distance (see https://www.poetexas.com/pages/poe-calculator )
the power source could be the power supply that came with the wireless access point, IP video surveillance camera, etc.
This set contains
a very cost effective injector and breakout or splitter component.
The injector inserts the DC voltage at the source location into the 3.5mm x 1.35mm injector plug.
The DC voltage is then carried over the spare pairs of the 10BASE-T or 100BASE-T network cable.
The breakout or splitter extracts the DC voltage from the network cable onto the 3.5mm x 1.35mm splitter jack.
Other Options
Also available is a 2.1mm version WS-POE-IO
Note: if you use this with a 5 volt device - keep in mind that with a 5 watt device, the ethernet cable will lose up to .4 volts every 10 feet - so the distance is limited.
We have a calculator on our web page to figure this for you.
Another method is to use a 6v power supply - this will extend the useful range to about 35 feet - but will cause the voltage at the camera to vary far outside of the stated specs.
Please see our 5 volt active splitters for flawless operation up to 328 feet at https://www.poetexas.com/







