Professional Aluminum Anodizing Pigment Dyes | Fiery Red E-L

Professional Aluminum Anodizing Pigment Dyes | Fiery Red E-L | Light to Rich Red | Powder Concentrate Makes 7.6 Liters or 2 Gallons
- All instructions and key dye features are labeled on the bottle for easy reference, including a color swatch.
- Packaged in a UV protective bottle to ensure a long and stable shelf-life of unused dye.
- THIS DYE IS SHIPPED IN POWDER FORM TO INCREASE SHELF LIFE. Red pigment is roughly 1 tablespoon in volume. Standard dry shelf life is 5-10 years. TO ACTIVATE COLOR: Open canister. Fill with distilled water to half an inch (12mm) from the opening of the canister. Close canister tightly. Shake well for 30 seconds. Once activated, use product within 1 year.
- Store in a cool, dry location for longevity. Once activated, this 80 mL / 2.7 oz bottle makes 7.6 liters (or 2 gallons) of anodizing dye bath. This dye has very fast uptake and is stable in saturation.
- Dyes are RoSH compliant and made in the USA. Professional anodizing dye with repeatable consistent colors. Create bright, bold colors on anodized aluminum surfaces.
READ SDS SHEET PRIOR TO HANDLING AVOID INHALATION, INGESTION, EYE AND SKIN CONTACT KEEP OUT OF REACH OF CHILDREN
Fiery Red - Red E-L is an anodizing dye. Use Red E-L only on aluminum, magnesium, titanium and tantalum. Red E-L is usually used on aluminum. It is not intended for use on any other metals or materials.
Red E-L can change its shade of red depending on how long it is in the dye bath. It can be a grayish red if you do a shorter anodizing cycle. For a longer duration in the anodizing bath and in the dye bath, Red E-L will look like fiery red hot coals.
The anodizing process parameters have a significant impact on the properties of the oxide formed. This means that the color is dependent on the anodizing process.
Red E-L is RoHS compliant.
Anodizing is an electrochemical conversion process. Anodizing changes the outer surface of the aluminum. Anodized aluminum has different characteristics than raw aluminum. Some of the characteristics of anodized aluminum include durability and weight. (It is lighter weight than stainless steel.)
The process of "anodization" creates a thick oxide layer. This thick oxide layer makes it very hard, quite scratch resistant and improves its corrosion resistance. Also, the thick oxide layer makes it easier to clean than raw aluminum. Because of its porous nature, anodizing makes it possible to dye aluminum many colors.
Anodized aluminum can replace expensive stainless steel in certain applications. Some applications for anodized aluminum are automotive, aerospace, electronics, furnishings, sports equipment, hobby & miniature parts, etc.
Specifications on Red E-L Concentration:The 80 mL bottle makes 7.6 L (2 gal.) pH - 5.0-6.0 Raise with ammonium hydroxide, lower with acetic acid. Temp: 120-140°F. Light Fastness: 6 (Lightfastness describes how resistant the dye is to fading when exposed to light.) Time: 3-10 minutes depending on saturation preference.
Country USA
Brand INTERACTIVIA
Manufacturer Anodizing Dye
Binding Unknown Binding
ItemPartNumber AN80KCFREL
Model AN80KCFREL
Color Light to Dark Red
Size Makes 7.6 liters or 2 Gallons
UnitCount 1
ReleaseDate 0000-00-00

Country	USA
Brand	INTERACTIVIA
Manufacturer	Anodizing Dye
Binding	Unknown Binding
ItemPartNumber	AN80KCFREL
Model	AN80KCFREL
Color	Light to Dark Red
Size	Makes 7.6 liters or 2 Gallons
UnitCount	1
ReleaseDate	0000-00-00

Professional Aluminum Anodizing Pigment Dyes | Fiery Red E-L | Light to Rich Red | Powder Concentrate Makes 7.6 Liters or 2 Gallons

Customers who purchased this also purchased....