Radiation Alert SEI Inspector Extreme USB Handheld Digital

Radiation Alert SEI Inspector Extreme USB Handheld Digital Radiation Detector with LCD Display and Protective Boot
- Radiation detector offers maximum performance in a lightweight, rugged solution for using your survey meteres in the field, is designed specifically for individuals operating in tough environments
- On board memory to collect accumulated counts; meter will hold at full-scale in fields as high as 100 times the maximum reading for anti-saturation; normal background radiation: approx 10 to 20 CPM
- Free Observer USB Software that allows you to download your data from the internal memory, set computer alarms, and calibrate your instrument; alert set range: 0 to 50 mR/hr and 1 to 160000
- Thin wall GM tube provides excellent sensitivity to low levels of alpha, beta, gamma, and x-rays; output: dual miniature jack drives CMOS or TTL devices and counts to computer or datalogger
- USB for use with observer USB software for PCs battery: one 9-volt alkaline battery; battery life is approx. 2000 hours at normal background radiation levels; window thickness: 1.4 to 2 mg/sq cm
S.E. International Radiation Alert Inspector Xtreme USB is handheld digital radiation alert detector. It has built in efficiencies for common isotopes to calculate activity in Bequerels and DPM. It is optimized to detect small changes (low levels) in radiation levels and to have high sensitivity to many common radionuclides. The new back lit display shows readings in your choice of counts per minute (CPM), counts per second (CPS) uSv/hr, mR/hr, or in accumulated counts. The SEI Inspector Xtreme USB counts ionizing radiation changes, and the unit of measurement is selected and displayed using the mode switch. The display shows various indicators, based on the mode setting, the function performed, and remaining battery power. These include low battery, alert, timer, total mode calibration mode, utility menu (timer, calibration, alarm set mode), and units of measurement. Reading ranges: 0.001 (1&muR) to 100.00 mR/hr, or 0 to 350,000 CPM, or 0.01 to 1000 ÂµSv/hr, 0 to 5,000 CPS, total counts 9,999,000 ÂµSv/hr. Calibration: Calibrated electronically using the free Observer USB software. Accuracy: MR/hr + or - 10 percent (NIST), + or -15 percent maximum 0 to 100, ÂµSv/hr + or - 10 percent (NIST), + or - 15 percent maximum 0.01 to 1000, CPM + or - 10 percent (NIST), + or -15 percent maximum 0 to 350000 (referenced to CS137). It has a factory default calibration reset option that will automatically reset to auto averaging, mR/hr, CPM, and CAL (calibration) 100. Energy sensitivity: 3340 CPM/mR/hr, referenced to Cesium (Cs) 137. Energy sensitivity detects alpha down to 2.0 MeV. It detects beta at 0.16 MeV with typical 25 percent detection efficiency at 1 MeV. It detects gamma down to 10 keV through the end window. Detection: Smallest detectable level for I-125 is 0.02 ÂµCi at contact. It detects gamma and x-rays down to 10 keV typical through the window, and 40 keV minimum through the sidewall. GM tube: A halogen-quenched, uncompensated GM tube with an effective diameter of 1.75-inches. The detector is powered by a 9-volt alkaline battery (not included).
Country USA
Brand Radiation Alert
Manufacturer S.E. International
Binding Misc.
ItemPartNumber INSPECTXUSB
Model INSPECTXUSB
UnitCount 1
ReleaseDate 0000-00-00

Country	USA
Brand	Radiation Alert
Manufacturer	S.E. International
Binding	Misc.
ItemPartNumber	INSPECTXUSB
Model	INSPECTXUSB
UnitCount	1
ReleaseDate	0000-00-00

Radiation Alert SEI Inspector Extreme USB Handheld Digital Radiation Detector with LCD Display and Protective Boot

You might also like...