STEPPERONLINE Digital Stepper Driver 0.3-2.2A 10-30VDC 1/64 Micro-Step Resolutions for Nema 8, 11, 14, 16, 17 Stepper Motor

Overview:

This driver is an industrial-grade stepper motor driver which can be used to drive 2-phase and 4-phase motors from Nema 8 ~ Nema 17 size.
It works with 10-30VDC voltage and can provide Max 2.2A current, and Max 1/64 microsteps, you can set the DIP switches to get the current and microsteps you need.
Different with cheap chips TB6600 or fraud TB6600(TB67S109) drivers, DM320T can drive motor much smoothly with less heat and noise, and the most important things is its reliable stability.

Key Features:

* Anti-Resonance for optimal torque, extra smooth motion, low motor heating and noise
* Motor auto-identification and parameter auto-configuration for optimal torque from wide-range motors
* Step & direction (PUL/DIR) control
* Multi-Stepping for smooth motor movement
* Optically isolated inputs
* Input voltage 10-30VDC
* 8 selectable micro-step resolutions of 1/2, 1/4, 1/8, 1/16, 1/20, 1/32, 1/40, 1/64 via DIP switches
* 8 selectable output current settings of 0.3 - 2.2A via DIP switches
* Soft-start with no "jump" when powered on
* Pulse input frequency up to 60 KHz
* Automatic idle-current reduction
* Protections for over-voltage and over-current

Electrical Specifications:

* Output Peak Current: 0.3~2.2A (1.6 RMS)
* Input Voltage: +10~30VDC
* Logic Signal Current: 7~16mA (Typical 10mA)
* Pulse Input Frequency: 0~60kHz
* Isolation Resistance: 100MΩ
* Cooling: Natural Cooling or Forced cooling
* Environment: Avoid dust, oil fog and corrosive gases
* Ambient Temperature: 0℃ － 65℃
* Humidity: 40%RH－90%RH
* Operating Temperature: 0℃ － 50℃
* Vibration: 10-50Hz / 0.15mm
* Storage Temperature: -20℃ － 65℃
* Weight: Approx.90g (3.5oz)

Packing List:

1 x Digital Stepper Driver DM320T