Sewell SW-32988 Direct BlastIR Wireless Pro IR Repeater,

Sewell SW-32988 Direct BlastIR Wireless Pro IR Repeater, Remote Control Extender Kit (IR Emitter and Receiver),Black
- Note Some devices use RF instead of IR for remote control. The Blast IR Wireless Pro only works with IR devices. Please check the signal type of your remote to ensure it is IR before ordering. .Wireless Distance: 200m (650 ft.), distance may vary due to obstacles, IR Receiver Distance: 7m (30 ft.)Incompatibility : Yamaha HTR 6140, Arris DCX 3520E-M, OSD ATM-7 Speaker Selector
- BlastIR Pro receivers are directional and require facing the receiver towards where you will be using the remote. To improve reception and widen the angle of control, we recommend using the included IR receiver cable connected to the main receiver unit.
- BlastIR Pro Emitters work best when placed within a few inches of the devices you want to control. For best results we recommend attaching the included optional IR emitter cables so that the emitter is directly over the IR receiver of up to two devices. These are designed to stick directly to the devices that you are trying to control rather than sitting in front of them.
- Included USB and AC power cables, extra IR cables, mounting adhesive, and rubber feet.
- Wireless Distance: 200m (650 ft.), distance may vary due to obstacles, IR Receiver Distance: 7m (30 ft.)
- Incompatibility : Yamaha HTR 6140, Arris DCX 3520E-M, OSD ATM-7 Speaker Selector
Multizone: Protect from Interference Most IR extenders are programmed to pass any signal that is sent through the receiver. Sometimes this may disrupt your setup as a few devices in your closet run on a similar IR frequency and cause interference with one another. The Multizone feature protects your devices from interference from other devices. This gives you the ability to have certain devices controlled only from specific areas in your setup. This has been a requested feature from many of our customers as they have extended IR signals but unintentionally were controlling two devices located in the same space. Cable boxes have especially been a pain since multiple cable boxes are easier to have based in the same area. Now with the BlastIR Wireless Multizone you are able to ensure you will only control the box that is attached to one of your TVs and not the other. The Channel IR System The Multizone feature works on a 10-channel system, this system gives you the ability to interact with your devices without needing to worry about your Wireless Extenders interfereing with one another. The system also gives you the option of using any number of transmitters or receivers on any given channel. This gives you complete freedom of choice for where your displays and devices can be placed without having to complicate your setup. The BlastIR Wireless Multizone Receivers will only communicate with the BlastIR Wireless Multizone Emitters that are set to the same channel. If you happen to own the classic BlastIR Wireless, this product will also work with it. Channel 0 on this product will allow IR signals to be sent between the two diffferent versions.

Country	USA
Brand	Sewell
Manufacturer	Sewell
Binding	Electronics
ItemPartNumber	SW-32988
Model	SW-32988
Warranty	1 year manufacturer
Color	Black
ReleaseDate	2021-05-11
Size	Standard
UnitCount	1
UPCs	685289329884
EANs	0685289329884

Sewell SW-32988 Direct BlastIR Wireless Pro IR Repeater, Remote Control Extender Kit (IR Emitter and Receiver),Black

You might also like...