Proxicast Indoor/Outdoor Omnidirectional WiFi Antenna - Tri-Band 2.4/5.8/6 GHz - 3-5 dBi Gain - Vandal Resistant Low Profile Fixed Through-Hole Mount - 10 ft Coax Lead w/RP-SMA (ANT-131-002)

This low profile (~ 3 inches tall) fixed mount omni-directional antenna provides 3 to 5 dBi of gain and supports both the 802.11 b/g/n 2.4 GHz and 802.11 a/ac 5.8 GHz frequency bands. Permanently mounts via a 5/8 in. (16 mm) hole with locking internal nut. Resists vandalism with no exposed coax cable, high impact ABS radome shell and an extra thick threaded screw mounting post. Includes 10 ft of low-loss RG58U coax fed through center mounting post. Includes "L" bracket for optional wall mounting.

Ideal for use in vending machines, meter housings, equipment sheds, or other locations requiring a low-profile vandal resistant external antenna. Also suitable for vehicle mounting on buses, vans, trucks or other mobile installations. Completely waterproof (IP67) when installed with post extending into a water-tight enclosure. Not waterproof when used exclusively with wall bracket.

Integrated RPSMA male plug connector mates with female jack found on most Wi-Fi access points and routers.

* For optimum performance this antenna should be mounted on a flat, horizontal metal surface at least 8 inches in diameter.

Specifications

Frequency Range: 2400-2483 / 5150-5250 / 5725-5850 MHz (802.11 a, b, g, n, ac)
Impedance: 50 ohm
VSWR: < 2.0:1
Gain: 3-5 dBi
Radiation: Omni
Polarization: Vertical
Connector: RPSMA plug (male)
Material: UV stabilized ABS plastic (black)
Connector: Brass with Nickel plating
Cable Length: 10 ft (3m) low-loss RG58U coax
Height: 3.2 in (82 mm)
Diameter: 1.9 in (48 mm)
Weight: 6.2 oz (176 g)
Op. Temp.: -40C to +70

Note: MIMO systems should have identical antennas on all connectors for best results.