Viofo 3-Wire HK3 Hardwire Kit for The A119V3 and A129 Dash Cameras with Low Profile (Micro) Fuse Taps

This Viofo 3-Wire Hardwire Kit will automatically enable the Parking Mode in the Viofo A129 dash camera. Red wire (Battery) connects to a fuse that has constant power, the yellow wire (ACC) connects to a fuse that only has power when the key is turned to accessory mode or when engine is turned on and the black wire (GND) goes to ground. With Parking Mode enabled in the A129, the camera will automatically enter Parking Mode when the engine is shut off. There are 3 Parking Mode options: 1) Auto Event Detection: Automatically records when detecting moving objects or impact while car is parked. 2) Time Lapse: Photography at specified intervals so the video can be played back much faster than real time. 3) Low Bitrate Recording: Record video at low bitrate to save storage space. There are also 4 voltage cutoff settings to prevent your vehicles battery from depleting - 12.4V, 12.2V, 12V and 11.8V. Hardwire kit will shut off power when it senses if your battery voltage goes below the set value. For Parking Mode to function, the power cable MUST be connected directly into the camera, not through the mount. Your firmware MUST also be version 1.5 or later. Included in package: Viofo 3-wire hardwire kit and 2 Low Profile (Micro) fuse type Tap-A-Fuse wires with 5A fuses. Please be sure you know which fuse type your vehicle requires before buying.