Wolfwhoop Q1 5.8GHz 40CH 0.01/25/200/500/800mW Switchable FPV Transmitter with Uart Support OSD Configuring via Betaflight Flight Controller
Sold Out / Out of Stock
Wolfwhoop Q1 5.8GHz 40CH 0.01/25/200/500/800mW Switchable FPV Transmitter with Uart Support OSD Configuring via Betaflight Flight Controller
2S-6S input power supported, 5V output for camera
LC filter allows ultra clean fpv video
0.01/25/200/500/800mW Switchable
Support parameter remotely adjusted by Betaflight, flight controller, OSD
0.01mW-Power up and test your system during a race with zero interference
Note: this version just support betaflight 3.2 Feartures: 5V output for camera 2S-6S input power supported LC filter allows ultra clean fpv video 0.01/25/200/500/800mW Switchable Integrated with Uart, connectable to betaflight FC 0.01mW-Power up and test your system during a race with zero interference Support parameter remotely adjusted by Betaflight, flight controller, OSD 5V BEC output, support power for receiver and camera 0.01mW-Power up and test your fpv system during a race with zero interference with any neighbor active channels LED display for indicating CH/Band/Power
Specifications: Operating Voltage: 7 - 24V Power supply: 5V camera@under 0.3A max Output power: 25mw: 100mA @12v 200mw: 180mA @12v 500mw: 250mA @12v 800mw: 300mA @12v Range: Up to 4km with omnidirectional RHCP antennas Antenna connector: SMA Female Video Format: NTSC/PAL Port connector: JST,6pin Dimensions: 26(H)x19(W)x8(D)mm Weight:6.7g(with SMA, without antenna)
Note :
5645/5925/5945(E4/E7/E8) are not available sue to FCC regulation. Selecting 5645/5925/5945(E4/E7/E8) will be invalid action.
37 channels are all above 5650 and below 5925MHz, which are legal to use in the USA with an amateur radio license.
This equipment is being sold under FCC's amateur radio rules. Operators must require amateur radio license to operator legally in the US. Use of amateur equipment without a license or use of equipment on restricted frequencies could subject the operator to significant fines by the FCC. By purchasing this equipment, the user is agreeing that they understand these responsibilities and will operate the equipment legally. More information related to ARL, please go to http://www.arrl.org/getting-licensed.