Wolfwhoop Q5 5.8GHz VTX with IPEX Antenna Connector and 0.01/25/50/100/200mW 37CH Switchable FPV Transmitter with FC Uart Support OSD Configuring via Betaflight Flight Control Board
Product Description
Wolfwhoop Q5 5.8GHz VTX with IPEX Antenna Connector and 0.01/25/50/100/200mW 37CH Switchable FPV Transmitter with FC Uart Support OSD Configuring via Betaflight Flight Control Board
- IPEX has more mating cycles and is more robust
- You can do so with the push button on the VTX
- 0.01mW-Power up and test your fpv system during a race with zero interference with any neighbor active channels
- This VTX is that you can mount it on top of your mini FC/PDB stack thanks to the 16x16mm mounting pattern
- FC Uart is basically a feature that allows your to change your VTX settings in Betaflight OSD or even from your Taranis Screen using LUA scripts
It's similar to the Q3 but has a smaller profile that uses 20x20mm mounting pattern, which be designed for smaller micro builds.
One cool feature about this VTX is that you can mount it on top of your mini FC/PDB stack thanks to the 16x16mm mounting pattern.
OSD configuration using FC Uart (F3/F4/F7 with OSD)
Built-in BEC: 5V camera @under 300mA
One button frequency and power setup
25/50/100/200mW power switchable
Input voltage is 5V, if you want to use with 1S Lipo battery, The package is includes a 3.7V to 5V power booster
Specification:
Input voltage: 5V
Extra features: FC Uart, Parameter-adjusting Mode(0.01mW)
Built-in BEC: 5V camera @under 300mA
Output power:
25mW:100mA @5V
50mW:120mA @5V
100mW:180mA @5V
200mW:220mA @5V
Antenna connector: IPEX
Port connector: JST,6pin
Dimensions: 20(W)X20(D)mm, 16X16mm(hole)
Weight: 2.5g(excluding antenna)
Package included:
1 X VTX
1 X UFL pigtail
1 X power booster
1 X user manual
Note :
5645/5925/5945(E4/E7/E8) are not available sue to FCC regulation. Selecting 5645/5925/5945(E4/E7/E8) will be invalid action.
37 channels are all above 5650 and below 5925MHz, which are legal to use in the USA with an amateur radio license.
This equipment is being sold under FCC's amateur radio rules. Operators must require amateur radio license to operator legally in the US. Use of amateur equipment without a license or use of equipment on restricted frequencies could subject the operator to significant fines by the FCC. By purchasing this equipment, the user is agreeing that they understand these responsibilities and will operate the equipment legally. More information related to ARL, please go to http://www.arrl.org/getting-licensed.
Technical Specifications
You might also like
FrSky XM Plus Mini Receiver up to 16CH 1.6g Full Range fit for Micro Drone
Caddx FPV Camera Newest Turbo EOS2 Mini FPV Action Camera 1200TVL FOV 160° Wide Angle 1/3" CMOS 16:9 for FPV Quadcopter Racing Drone
FrSky R-XSR Ultra SBUS/CPPM D16 16CH Mini Redundancy Receiver 1.5g for RC Multirotor FPV Racing Drone
Finware 10 Pair Amass XT30U (XT30 Upgrade) Male Female Bullet Connectors Power Plugs with Heat Shrink for RC Lipo Battery
iFlight 150mm 2.4G Receiver Antenna Generation 4 RF113 (smaller) IPEX Port for Latest FrSky X4R-SB Receiver and Remote Controller (pack of 20pcs)
MG Chemicals 422B Silicone Modified Conformal Coating, 55 ml Bottle
Caddx Mini FPV Camera EOS2 Turbo EOS2 4:3 1200TVL 2.1mm FOV 160 Degree 1/3 CMOS NTSC for FPV Quadcopter Racing Drone by Crazepony
Wolfwhoop P-1 Micro 5.8GHz 25mW/50mW/200mW FPV Transmitter and 600TVL AIO Camera with OSD Interface for FPV Quadcopter Drone
Ovonic 14.8V 1550mAh 100C 4S LiPo Battery Pack with XT60 Plug for FPV Racing RC Quadcopter Helicopter Airplane Multi-Motor Hobby DIY Parts
Litorange 320PCS M2 Male Female Nylon Hex Spacer Standoff Screw Nut Assorted Assortment Kit (Black)